How to Remove Stickers From Inside Rear Car Window

This article may contain affiliate links. For details, visit our Affiliate Disclosure page. As an Amazon Associate I earn from qualifying purchases.

How to Remove Stickers From Inside Rear Car Window

The lovely sticker on the inside of your rear car window offers your vehicle’s interior a fresh new look. This will not last indefinitely, since you will need to remove it to add a fresh sticker or maintain the area clear.

How to remove stickers from inside rear car window?’ is the question presently. Is it possibly feasible to remove the stickers without scratching your rear window?

How to Remove Stickers From Inside Rear Car Window

It’s far easier to apply rear car window stickers than it is to remove them. Because once they are on the window, they are exposed to both hot and cold temperatures, this is the case.

Window stickers adhere strongly to the window glass due to the sun heating the glue on the sticker and then contrasting with the cooler night temperature, making them incredibly difficult to remove without a battle.

Removing stickers from rear car windows can be done in a variety of ways. Here are some of them:

  • Razor blade
  • Adhesive remover
  • Heat
  • Rubbing alcohol
  • Ice
  • WD-40

The above methods can help you remove stickers from the inside of your rear automobile windows, however, I highly recommend using a razor blade and adhesive remover. These two approaches are suggested since they are both safe and effective. If not utilized properly, the other procedures may pose a risk to the car window and trim.

These damages may be more problematic than the rear car window stickers you’re attempting to remove.

How to Remove Rear Car Stickers Using Razor Blades

Materials needed:

  • Microfiber towel or a soft cloth
  • Cleaner for windows
  • Adhesives remover
  • Razor blade
  • Water for rinsing

Important note: The razor blade you use to remove the sticker from your car’s interior window may cause harm to the surface. What you want to do is gently scratch it.

Step-by-step instructions:

1. Clean your windows with a glass cleaner

Spray or apply a glass cleaner to the location, depending on your glass cleaner solution. Make sure to get an ammonia-free glass cleaner so that the rubber around the back window of your car doesn’t get damaged.

Wipe the sticker place with a microfiber towel after applying the glass cleaner. The purpose of utilizing a soft or microfiber material is to avoid scratching the interior surface of your car’s rear window.

2. Take away the Sticker

The glass cleaner has thoroughly cleaned the back of your internal window. The next step is to use a razor blade to remove the sticker. To avoid accidentally scratching the glass of your inside rear window, get a razor blade with no rust or dents.

You can get a razor blade scraper to prevent scratching the window glass as it has a grip rather than the blade itself. Make sure to scrape gently.

Now reapply the glass cleaner to create a slick surface that will allow the razor blade to simply glide through the sticker place on the glass.

Start removing the sticker from the glass by holding the razor blade at a 45-degree angle. If you peel the sticker while scraping, you can lessen the amount of residue it leaves behind. To avoid harming your vehicle’s interior glass, carefully scrape the sticker from your interior. Keep an eye out for your fingers, cleaning; you don’t want to get wounded.

3. Remove any remaining residue

You will be left with sticker leftovers after thoroughly removing the sticker off the inner rear automobile window. You want to get rid of the residues, so you’ll have to do some extra gentle scraping. You can use adhesive remover to wipe the leftovers without scratching them.
Use your razor to remove any remaining adhesive. Apply the same method we used to remove the sticker before.

4. Clean your windows using glass cleaner

If the adhesive remains, use glass cleaner to remove it. Rep the first procedure, this time using the cleaner and a microfiber towel to wipe it down. A razor blade is no longer required. Make sure to get rid of the glue as well.

5. Dry the area

Finally, clean water should be used to rinse the area. Make sure you don’t get water on your car’s interior seats.

How to Remove Rear Car Window Stickers Using Adhesive Remover

Select your favorite adhesive remover and check the labels to make sure it’s safe to use on a surface like a back car window and the automobile as a whole to avoid damaging paint and window tinting.

Wipe any dirt and grime from the window with a car glass cleaner and a microfiber towel. Apply adhesive remover carefully to the sticker, or as directed by the manufacturer, and let for 5-10 minutes.

Once the sticker has been loosened enough by the adhesive remover, scrape it off with a plastic scraper found in your kitchen. Use one that won’t leave a mark.

If you don’t have a plastic scraper, clean the sticker with a folded paper towel. Start scrubbing from a corner with a folded paper towel, then slowly work your way toward the middle.

Scrub or scrape the sticker and any leftover adhesive until it is fully gone. Then clean the area with a microfiber towel and auto glass cleaner before buffing the glass to shine.

This method isn’t the most convenient because it often results in a sticky mess when the adhesive dissolves, but it is safe and effective. You’ll need patience to utilize this procedure, as it requires a great deal of scraping, and cleaning as you can see.

Because the stickers are being removed from the inside, a surface test should be performed to ensure that the adhesive remover does not hurt surfaces such as car seats and doors.

Cover the surface with an old cloth or towel to keep the adhesive remover from contacting the car.

If you don’t have much patience and don’t want to deal with all of the stickiness, attempt the first option, which involves using razor blades.

Alternatives to Getting a Sticker Removed from the Inside of a Rear Car Window

As previously stated, stickers can give beauty to your automobile inside, but you must remove them once the beauty has faded. You can try some alternative options below.

1. Using heat

This method only requires a hand dryer, paper towels, and warm water.

Turn on the highest setting on the hand dryer. If you have one, you can also use a heat gun. Hold it for a minute or two over the sticker. Quickly peel the corner of the sticker away from the glass surface, then slowly remove away.

To remove the residue, use hot water and paper towels.

2.  Rubbing alcohol

Remove the sticker from the glass by cleaning it, applying rubbing alcohol, and peeling it away. Reapply to completely remove the glue from the glass, then clean it. To give the area a shine, use the other side of the cleaning towel to buff it.

If not properly diluted, rubbing alcohol can permanently damage automobile paint and other surfaces. Make sure you’re using the correct concentration.

3. Ice

A sticker on your rear inside the window can be removed with a pack of water. Let the ice cool on the sticker place before peeling it away without scratching it.

4. Razor and Windex

Some dealerships remove window stickers with a straight razor blade and Windex without damaging the paint. Simply squirt Windex on the sticker and scrape it off using a razor blade at an angle. If there are any residues left, use extra Windex and fine steel wool to wipe them up.

Note: Steel wool can scratch the glass, so proceed with caution.

5. WD-40

Remove as much of the sticker as you can by gently peeling it away. Wait a few minutes after spraying WD-40 on the remaining sticker bits and adhesive residue. Wipe the spray away with a moist cloth once the timer has expired. If necessary, clean the area.

Conclusion

Stickers will always find their way inside your rear car window, therefore knowing how to remove stickers from the inside of a rear car window is essential.

The majority of the approaches covered in this article are both safe and effective, as well as simple to implement. Some of them should be taken with caution since if they are overused, they might cause irreversible damage.