Last Updated on 2 years by Ollie Barker
Many drivers complain that “my car shakes when I hit 60 mph“. Actually, the vibration could occur at even lower speeds but you can feel it vividly with high speed.
While car vibration usually shows during engine start-up, acceleration, and deceleration, they may also occur during cruising speed. This experience can be very scary or annoying for some people – but fear not! Here are the top 10 ways to deal with this problem so you don’t have to do without your ride.
My Car Shakes When I Hit 60 Mph
There are many reasons that your car shakes when it hits 60 Mph. Every car is different in design and thus they have different problems. The experts blame vibration or shaking on poor alignment, worn or damaged tires, bad struts, loose suspension parts, cracked engine mounts, worn-out shock absorbers, loose steering linkage, misaligned wheels, and brakes.
Although most of these are not really serious issues if left unattended they can cause more serious problems. For example, an improperly balanced tire has a greater likelihood of coming off the rim during operation. Here are the 3 most common causes:
#1 Tires Issues
Tires are the most vulnerable part of your car when it comes to vibration. If they are not properly balanced, they tend to vibrate when you’re driving. This is because the tires need room for movement that’s required to pass through bumps and curves in your path. However, if that space is not enough, tire vibration can occur.
As a result, vibrations can be felt in the driver’s seat and steering wheel, resulting in a mockery experience for the driver. The main culprits that need to be addressed are the vehicle’s wheels and tires.
#2 Worn Out Shocks and Struts
Worn-out shocks and struts can also cause car vibration when you’re driving at a high speed. Most people confuse shocks and struts with each other, but they are two different parts of your car’s suspension system.
In short, shocks are shock absorbers that prevent the body from shaking as it moves rather than trying to stop movement altogether as a strut does. Struts are the shock absorbers that connect the vehicle’s suspension components, such as the springs and shock absorbers, with its chassis.
If shocks or struts are worn out, the car tends to shake or vibrate during acceleration or braking. You can easily know if your shocks are worn out if you find yourself bouncing around inside the car while driving at high speeds.
#3 Loose Parts of Your Car
Loose steering component is another cause of vibration in cars especially when it hits 60 Mph. A loose steering wheel means that your wheels and tires are not in line and you will feel the vibration in the steering wheel. Loose tie rods and ball joints can also cause vibration in your car when you hit 60 Mph.
There are other reasons why your car shakes when it hits 60 Mph, but we will focus on these three common causes to keep things simple.
3 Solutions To Fix Car Vibration
Once you’ve discovered the reasons why your car shakes when it hits 60 Mph, you can go about fixing them to hold back further damage. Here are some suggestions:
#1 Tire Balance
Tire imbalance is a major reason why cars shake. If the tires are not properly balanced, they tend to wobble when they are driven even at low speeds. However, if tire balance is not attended to immediately, it becomes more serious by causing vibration during acceleration or braking.
Most tires require specific air pressures. If the air pressures are not enough, your tires will not provide traction or stability when you drive. This in turn causes your wheels to wobble in the chassis when in motion.
#2 Worn Out Shock Absorbers
Shock absorbers are lined up underneath your car’s suspension system to absorb shock between the suspension system and the body itself. If they are worn out, this usually occurs because of frequent use or because they are too old for regular use. Shock absorbers are a major factor in your car’s vibration when you hit 60 Mph. Similar to tires, they should have specific air pressures that will help to maintain the proper amount of air in them.
#3 Loose Parts of Your Car
Loose parts should not be ignored when your car shakes when it hits 60 Mph. If these parts are not secure enough, they can cause further tension on the parts above them leading to more vibration or shaking. However, it’s not easy to detect the loose parts and since those can be adjusted by your mechanic, you should make an appointment with one as soon as possible.
Since there are at least three causes of vibration in cars, you can work on all of them simultaneously. For example, if you’ve got worn-out shock absorbers and loose parts at the same time (or even if it’s just one), try changing both at the same time.
Motor vehicles are designed to function at the most stable speeds at which they were designed. With that said, it is common for vehicles to experience vibration as a normal part of the life cycle of their components. If you experience car vibration when it hits 60 Mph, try to find out the actual cause and fix it.
Hi, My name is Ollie Barker.
With 25 years working in repair and detailing shops. I’d love to share my tips & tricks to all car lovers. Also, give my recommendations on which products are the best to have on the market.
Thanks for visiting CarDetailingArt! Hope you enjoy your time on my little blog!